Skip to content

178SSWT36FHC

Avantco SS-WT-36F-HC 36" Two Door Worktop Freezer with 3 1/2" Backsplash

5
buy at webstaurantstorebuy at webstaurantstore
product image front view
product image front view
product image front view
product image front view
product image front view
product image front view

Features

  • Strong and sleek type 430 stainless steel exterior with 3 1/2" backsplash
  • Type 304 stainless steel interior
  • Foamed-in-place polyurethane insulation
  • Maintains cold temperatures from -8 to -1 degrees Fahrenheit
  • 115V; 1/2 hp

Certifications

  • 5-15P

    This unit comes with a NEMA 5-15P plug.

  • ETL, US

    This product has been certified by ETL, a division of the Intertek Group, to meet applicable electrical product safety standards required for use in the United States.

  • ETL Sanitation

    This product has been certified by ETL, a division of the Intertek Group, to meet applicable sanitation standards required for use in the United States and Canada.

Other Available Styles

Make food preparation as convenient as possible with the Avantco SS-WT-36F-HC 36" worktop freezer!

Epoxy-Coated Shelves

The two epoxy-coated steel shelves are well equipped for holding heavy bulk ingredients and can withstand up to 88 lb. per shelf.

Spacious Worktop

A spacious stainless steel worktop surface provides ample room for slicing, dicing, assembling and mixing. The 3 1/2" backsplash will prevent messes during prep from getting onto the wall.

Stay-Open, Self-Closing Door

The refrigerated portion is readily accessible through the two doors. Each of these doors features a stay-open, self-closing function. This not only helps your employees easily load product without the door closing on them, but also helps make sure the door closes properly when quickly reaching into the unit without fully opening it.

Product Specs

  • Interior Thermometer

    Monitor the temperature of your unit and make sure it is at safe levels with the easy to read internal thermometer
  • Included Casters

    At the end of the day, take advantage of the casters and roll the unit aside to thoroughly clean the area where it sits.

How to Program a Carel PJEZ Controller on an Avantco Refrigerator

Learn how to use a Carel PJEZ controller on an Avantco refrigerator to set the low temperature limit.

Avantco: How to Clean Stainless Steel Refrigerators

Follow these tips for how to clean your Avantco stainless steel refrigerator.

Avantco: How to Replace Door Gaskets

Here’s how to change a door gasket on Avantco Refrigeration products.

Specifications

  • Width 36 1/4 Inches
  • Depth 29 1/2 Inches
  • Height 38 3/4 Inches
  • Power Cord Length 84 Inches
  • Interior Width 33 Inches
  • Left Door Opening Width 14 5/16 Inches
  • Right Door Opening Width 14 5/16 Inches
  • Interior Depth 22 7/8 Inches
  • Interior Height 23 1/2 Inches
  • Work Surface Height 35 1/4 Inches
  • Amps 4.1 Amps
  • Hertz 60 Hz
  • Phase 1 Phase
  • Voltage 115 Volts
  • Wattage 275 Watts
  • Access Type Doors
  • Backsplash With Backsplash
  • BTU (LBP) 1,264 BTU
  • Capacity 8.2 cu. ft.
  • Capacity (per Shelf) 88 lb.
  • Compressor Location Rear Mounted
  • Compressor Style Side / Rear Breathing
  • Door Style Swing
  • Door Type Solid
  • Features Removable Magnetic Door Gaskets
  • Features With Backsplash
  • Hinge Location Left
  • Hinge Location Right
  • Horsepower 1/2 hp
  • Number of Doors 2 Doors
  • Number of Shelves 2 Shelves
  • Plug Type NEMA 5-15P
  • Refrigerant Capacity 3.2 oz.
  • Refrigerant Type R-290
  • Starting Amps 12.3 Amps
  • Starting Wattage 825 Watts
  • Style Counter Height
  • Temperature Range -8 - -1 Degrees F
  • Top Capacity 441 lb.

Customer Reviews

Overall Rating

5
1 reviews
  • 1 customers gave 5 star ratings
  • 0 customers gave 4 star ratings
  • 0 customers gave 3 star ratings
  • 0 customers gave 2 star ratings
  • 0 customers gave 1 star ratings

Share your thoughts

If you've used this product, leave a review to tell us and other customers what you thought about it.

    Frequently Asked Questions

    It should not be built into cabinetry. This unit requires 3” of clearance on all sides for proper ventilation.

    We're here to support you with your product

    Go to Support

    Get started with VersaHub